Viral Shield For OTB Anti-Microbial Fogging Tunnel

May 25, 2020

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

2. COMPOSITION/INFORMATION ON INGREDIENTS

99.98% Deionized Water
HAZARDOUS AND/OR REGULATED COMPONENTS
None
NON-HAZARDOUS COMPONENTS
Chemical Name Amount CAS Number
Ionized Copper Sulphate < 0.02 % 7758-98-7
HAZARDS DISCLOSURE
This product does not contain hazardous materials as defined by the OSHA Hazard
Communication Standard 29 CFR 1910.1200.
As defined under SARA 311 and 312, this product contains no known hazardous materials.

3. HAZARDS IDENTIFICATION

HMIS Rating - Health: 0;
Flammability: 0;
Reactivity: 0; Personal Protection Index: C NFPA Rating - Health: 0; Flammability: 0;
Reactivity: 0; Special Hazard: None NFPA/HMIS Definitions: (0-Least, 1-Slight, 2-
Moderate, 3-High, 4-Extreme).
These values are obtained using the guidelines or published evaluations prepared by the
National Fire Protection Association (NFPA) or the National Paint and Coating Association (for
HMIS ratings).

4. FIRST AID MEASURES

EYE CONTACT FIRST AID:
Under normal circumstances, the product has no harmful effect. Irrigate copiously with clean,
fresh water. Get medical advice if adverse symptoms appear.
SKIN CONTACT FIRST AID:
Under normal circumstances, the product has no harmful effect. Irrigate copiously with clean,
fresh water. Get medical advice if adverse symptoms appear.
INHALATION FIRST AID:
Under normal circumstances, the product has no harmful effect.
Get medical advice if adverse symptoms appear.
INGESTION FIRST AID:
Rinse mouth with water. Do not induce vomiting. Do not give alcohol. Get medical advice if
adverse symptoms appear.
STATEMENT OF PRACTICAL TREATMENT:
Always have plenty of water available for first aid.
NOTES TO PHYSICIAN:
Treat patient symptomatically.

5. FIRE FIGHTING MEASURES FLAMMABLE PROPERTIES

COC Flash Point: None
TCC Flash Point: None
Auto-ignition Temperature: None
FLAMMABLE LIMITS IN AIR
LEL: None
UEL: None
EXTINGUISHING MEDIA:
Material will not burn.
FIRE & EXPLOSION HAZARDS:
Material will not burn.
FIRE FIGHTING INSTRUCTIONS:
Contaminated extinguishing water must be disposed of in accordance with applicable regulations.

6. ACCIDENTAL RELEASE MEASURES

SAFEGUARDS (PERSONNEL):
Protect skin and eyes from prolonged exposure. Wear appropriate personal protective
equipment.
INITIAL CONTAINMENT:
Floor may become slippery. Contain spilled material. Wash area to prevent slipping. Treat or
dispose of waste material in accordance with all local, state/provincial, and national
requirements.
LARGE SPILLS PROCEDURE:
Forms smooth, slippery surfaces on floors, posing an accident risk. Clean up spills
immediately. Flush spill area with water to wastewater treatment system. After removal, flush
contaminated area thoroughly with water. Or, absorb spill with inert material (e.g., dry sand or
earth), then place in a chemical waste container dispose of in an approved sanitary landfill.
Treat or dispose of waste material in accordance with all local, state/provincial, and national
requirements.
SMALL SPILLS PROCEDURE:
Floor may become slippery. Wash with water or absorb spills with inert material. Treat or
dispose of waste material in accordance with all local, state/provincial, and national
requirements.

7. HANDLING AND STORAGE

RECOMMENDED STORAGE TEMPERATURE

Minimum: 4.4 0 C (39.9 0 F)
Maximum: 48.9 0 C (120.0 0 F)
HANDLING (PERSONNEL):
Avoid contact with eyes, skin, and clothing. Empty drums should be completely drained (triple
rinsed), properly bunged, and promptly returned to a drum reconditioner, or properly disposed
of. Wash hands thoroughly after handling. Wash contaminated clothing before reuse.
HANDLING (PHYSICAL ASPECTS):
Keep container closed to avoid contamination.
STORAGE PRECAUTIONS: Store in a cool dry place. Do not stack drums more than three
pallets high. Store in a tightly closed container.
SPECIAL SENSITIVITY:
None
MISCELLANEOUS:
Do not stack over three pallets high.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

ENGINEERING CONTROLS:
Good general ventilation should be sufficient to control airborne levels. Facilities storing or
utilizing this material should be equipped with an eyewash facility and a safety shower.
EYE / FACE PROTECTION REQUIREMENTS:
When splashing of the material may occur, chemical goggles and a face shield are
recommended.
SKIN PROTECTION REQUIREMENTS:
Observance of safety measures used in handling chemical substances.
RESPIRATORY PROTECTION REQUIREMENTS:
Under normal use conditions, with adequate ventilation, no special handling equipment is
required. At elevated temperatures, > 110 0 F, ventilation is required.
MISCELLANEOUS:
Wear an apron and protective clothing.
EXPOSURE GUIDELINES:
No Information Available.

9. PHYSICAL AND CHEMICAL PROPERTIES

% VOLATILES: 0 %
pH (5% B.V.): 3.5
10. STABILITY AND REACTIVITY
STABILITY: Stable.
POLYMERIZATION: Hazardous polymerization will not occur.
INCOMPATIBILITY WITH OTHER MATERIALS: None
DECOMPOSITION: Decomposition will not occur
CONDITIONS TO AVOID: This material is safe under normal storage and handling conditions.

11. TOXICOLOGICAL INFORMATION

12. ECOLOGICAL INFORMATION

13. DISPOSAL CONSIDERATIONS

WASTE DISPOSAL:
Uncleaned empty containers should be disposed of in the same manner as the contents. Treat
or dispose of waste material in accordance with all local, state/provincial, and national
requirements.
CONTAMINATED MATERIALS:
Wash contaminated clothing before reuse.
CONTAINER DISPOSAL:
Containers should be triple rinsed prior to disposal.

14. TRANSPORTATION INFORMATION

15. OTHER INFORMATION

ADDITIONAL INFORMATION:

The data in this Material Safety Data Sheet relates only to the specific material designate herein.
It does not relate to use in combination with any other material or in any process.

This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Wedoall.co.za

The data on this sheet are related only to
the specific material designated herein.

Wedoall.co.za assumes no legal responsibility for use or reliance upon these data.