Viral Shield For OTB Anti-Microbial Fogging Tunnel

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

  • Product Identification
  • Product Name: Viral Shield Sanitizer (non Alchohol)

2. COMPOSITION/INFORMATION ON INGREDIENTS

  • 99.98% Deionized Water
  • HAZARDOUS AND/OR REGULATED COMPONENTS
  • None
  • NON-HAZARDOUS COMPONENTS
  • Chemical Name Amount CAS Number
  • Ionized Copper Sulphate < 0.02 % 7758-98-7
  • HAZARDS DISCLOSURE
  • This product does not contain hazardous materials as defined by the OSHA Hazard
  • Communication Standard 29 CFR 1910.1200.
  • As defined under SARA 311 and 312, this product contains no known hazardous materials.

3. HAZARDS IDENTIFICATION

  • HMIS Rating - Health: 0;
  • Flammability: 0;
  • Reactivity: 0; Personal Protection Index: C NFPA Rating - Health: 0; Flammability: 0;
  • Reactivity: 0; Special Hazard: None NFPA/HMIS Definitions: (0-Least, 1-Slight, 2-
  • Moderate, 3-High, 4-Extreme).
  • These values are obtained using the guidelines or published evaluations prepared by the
  • National Fire Protection Association (NFPA) or the National Paint and Coating Association (for
  • HMIS ratings).
  • POTENTIAL HEALTH EFFECTS
  • EYE: No hazards expected in normal industrial use at room temperature.
  • SKIN: No hazards expected in normal industrial use at room temperature.
  • INHALATION: No hazards expected in normal industrial use at room temperature.
  • INGESTION: No hazards expected in normal industrial use at room temperature.
  • SIGNS AND SYMPTOMS OF EXPOSURE:
  • None if exposed areas are flushed promptly and thoroughly with tap water.
  • CARCINOGENICITY INFORMATION:
  • No known cancer hazards.

4. FIRST AID MEASURES

  • EYE CONTACT FIRST AID:
  • Under normal circumstances, the product has no harmful effect. Irrigate copiously with clean,
  • fresh water. Get medical advice if adverse symptoms appear.
  • SKIN CONTACT FIRST AID:
  • Under normal circumstances, the product has no harmful effect. Irrigate copiously with clean,
  • fresh water. Get medical advice if adverse symptoms appear.
  • INHALATION FIRST AID:
  • Under normal circumstances, the product has no harmful effect.
  • Get medical advice if adverse symptoms appear.
  • INGESTION FIRST AID:
  • Rinse mouth with water. Do not induce vomiting. Do not give alcohol. Get medical advice if
  • adverse symptoms appear.
  • STATEMENT OF PRACTICAL TREATMENT:
  • Always have plenty of water available for first aid.
  • NOTES TO PHYSICIAN:
  • Treat patient symptomatically.

5. FIRE FIGHTING MEASURES FLAMMABLE PROPERTIES

  • COC Flash Point: None
  • TCC Flash Point: None
  • Auto-ignition Temperature: None
  • FLAMMABLE LIMITS IN AIR
  • LEL: None
  • UEL: None
  • EXTINGUISHING MEDIA:
  • Material will not burn.
  • FIRE & EXPLOSION HAZARDS:
  • Material will not burn.
  • FIRE FIGHTING INSTRUCTIONS:
  • Contaminated extinguishing water must be disposed of in accordance with applicable regulations.

6. ACCIDENTAL RELEASE MEASURES

  • SAFEGUARDS (PERSONNEL):
  • Protect skin and eyes from prolonged exposure. Wear appropriate personal protective
  • equipment.
  • INITIAL CONTAINMENT:
  • Floor may become slippery. Contain spilled material. Wash area to prevent slipping. Treat or
  • dispose of waste material in accordance with all local, state/provincial, and national
  • requirements.
  • LARGE SPILLS PROCEDURE:
  • Forms smooth, slippery surfaces on floors, posing an accident risk. Clean up spills
  • immediately. Flush spill area with water to wastewater treatment system. After removal, flush
  • contaminated area thoroughly with water. Or, absorb spill with inert material (e.g., dry sand or
  • earth), then place in a chemical waste container dispose of in an approved sanitary landfill.
  • Treat or dispose of waste material in accordance with all local, state/provincial, and national
  • requirements.
  • SMALL SPILLS PROCEDURE:
  • Floor may become slippery. Wash with water or absorb spills with inert material. Treat or
  • dispose of waste material in accordance with all local, state/provincial, and national
  • requirements.

7. HANDLING AND STORAGE

RECOMMENDED STORAGE TEMPERATURE

  • Minimum: 4.4 0 C (39.9 0 F)
  • Maximum: 48.9 0 C (120.0 0 F)
  • HANDLING (PERSONNEL):
  • Avoid contact with eyes, skin, and clothing. Empty drums should be completely drained (triple
  • rinsed), properly bunged, and promptly returned to a drum reconditioner, or properly disposed
  • of. Wash hands thoroughly after handling. Wash contaminated clothing before reuse.
  • HANDLING (PHYSICAL ASPECTS):
  • Keep container closed to avoid contamination.
  • STORAGE PRECAUTIONS: Store in a cool dry place. Do not stack drums more than three
  • pallets high. Store in a tightly closed container.
  • SPECIAL SENSITIVITY:
  • None
  • MISCELLANEOUS:
  • Do not stack over three pallets high.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

  • ENGINEERING CONTROLS:
  • Good general ventilation should be sufficient to control airborne levels. Facilities storing or
  • utilizing this material should be equipped with an eyewash facility and a safety shower.
  • EYE / FACE PROTECTION REQUIREMENTS:
  • When splashing of the material may occur, chemical goggles and a face shield are
  • recommended.
  • SKIN PROTECTION REQUIREMENTS:
  • Observance of safety measures used in handling chemical substances.
  • RESPIRATORY PROTECTION REQUIREMENTS:
  • Under normal use conditions, with adequate ventilation, no special handling equipment is
  • required. At elevated temperatures, > 110 0 F, ventilation is required.
  • MISCELLANEOUS:
  • Wear an apron and protective clothing.
  • EXPOSURE GUIDELINES:
  • No Information Available.

9. PHYSICAL AND CHEMICAL PROPERTIES

  • FORM: Liquid
  • COLOR: Colorless
  • ODOR: None
  • BOILING POINT >100 0 C
  • SOLUBILITY IN WATER: Complete
  • SPECIFIC GRAVITY: 1.01 (Water = 1)
  • BULK DENSITY: 1.0
  • MELTING/FREEZING POINT: 0
  • 0 C
  • pH: 3.5
  • % VOLATILES: 0 %
  • pH (5% B.V.): 3.5
  • 10. STABILITY AND REACTIVITY
  • STABILITY: Stable.
  • POLYMERIZATION: Hazardous polymerization will not occur.
  • INCOMPATIBILITY WITH OTHER MATERIALS: None
  • DECOMPOSITION: Decomposition will not occur
  • CONDITIONS TO AVOID: This material is safe under normal storage and handling conditions.

11. TOXICOLOGICAL INFORMATION

  • EYE EFFECTS: No known hazards in normal industrial use.
  • SKIN EFFECTS: No known hazards in normal industrial use.
  • ACUTE ORAL EFFECTS: No known hazards in normal industrial use.
  • ACUTE INHALATION EFFECTS: No known hazards in normal industrial use.

12. ECOLOGICAL INFORMATION

  • No information available.

13. DISPOSAL CONSIDERATIONS

  • WASTE DISPOSAL:
  • Uncleaned empty containers should be disposed of in the same manner as the contents. Treat
  • or dispose of waste material in accordance with all local, state/provincial, and national
  • requirements.
  • CONTAMINATED MATERIALS:
  • Wash contaminated clothing before reuse.
  • CONTAINER DISPOSAL:
  • Containers should be triple rinsed prior to disposal.

14. TRANSPORTATION INFORMATION

  • Not classified in accordance with ADR/RID, IMDG, IATA and DOT regulations.

15. OTHER INFORMATION

  • Prepared By: S. Bahr
  • Approved By: S. Bahr
  • Approval Date: 02/02/2020

ADDITIONAL INFORMATION:

  • The data in this Material Safety Data Sheet relates only to the specific material designate herein.
  • It does not relate to use in combination with any other material or in any process.

This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Wedoall.co.za

The data on this sheet are related only to
the specific material designated herein.

Wedoall.co.za assumes no legal responsibility for use or reliance upon these data.

Covid19SanitationSanitise

2 comments

ysXRlkeMvrtNq

ysXRlkeMvrtNq

BwajgsMDdmeZH

CiTBkajRmStFVE

CiTBkajRmStFVE

YpbutjhUNaJXcSV

Leave a comment